Evropac flexitanks

Evropac flexitanks

Flexitank is a polymer elastic tank for liquid cargo transportation. Evropac uses its own Evropac flexitanks to transport liquid nonhazardous cargoes in 20-foot containers..

NEW GENERATION EVROPAC FLEXITANK IS FOR EDIBLE AND CHEMICAL NONHAZARDOUS LIQUID CARGOES TRANSPORTATION IN 20-FOOT CONTAINERS

Evropac flexitanks are made using the latest seamless technology of the outer fabric polypropylene coat reinforced with aramid threads and 4 inner layers of high-strength polyethylene film, equipped with ball and vent valves. Evropac flexitanks are available in blue color with red aramid threads passing every 10 cm along the outer layer.

Evropac flexitanks — a single use package.

Evropac flexitanks are allowed for use on the entire network of JSC “Russian Railways” for transportation of any nonhazardous liquid cargoes, including edible ones.
Evropac flexitanks underwent the food safety audit of major oil manufacturers.

Evropac flexitanks underwent the food safety audit of major oil manufacturers.

Evropac flexitank:

  • sealing
  • light in weight
  • quick to install
  • easy to utilize
  • 10 years of safe use
  • container effective volume is optimally used
  • effective tank volumeis from 17 to 24 thousand liters

NEW BUSINESS OPPORTUNITIES WITH EVROPAC FLEXITANKS

  • transportation cost optimization
  • small shipments
  • minimum delivery time
  • expansion of supply geography
  • product quality preservation
  • taking advantages of container transportation
  • entry of a company into export markets
Seamless technology
– reduced load on the side walls
– no container deformation
– 30% increased strength
Outerfabric polypropylene cover
– high strength
– resistance to abrasion
Reinforced with aramid threads
–strength of steel
– suppression of wave liquid oscillations
High-strength polyethylene film inner coating
– 4 layers
– high elasticity
– high- and low-temperature capability
Air valve
– 100% volume filling
– no overpressure
– stress decreaseto the outer layer
Anti-suction system
– completeproduct discharge
– no suction of polyethylene film
3 inch ball valve
– sealing
– high capacity
– double degree of protection

LEAVE A REQUEST FOR FREIGHT CALCULATION!

EVROPAC FLEXITANK — IS A TRANSPORTATION CONTAINERIZATION TOOL FOR NONHAZARDOUS LIQUID CARGOES

SIGNIFICANT SAVINGS OF TRANSPORTATION COSTS

  • no costs for interim transfer;
  • no intermediate storage and tank accumulation of liquid cargo in the port
  • no costs for return of an empty rolling stock;
  • no need to wash tanks;
  • no product losses during trans-fill.

TECHNOLOGICAL ADVANTAGES

  • full safety of the quality and quantity of cargo
  • absolutely clean product
  • no loss of product volumes indischarge
  • transportation of viscous cargoes at low temperatures
  • no need to wash tanks
  • temporary storage of cargo in a container
  • no need to return an empty container
  • supply of liquid cargoes in small shipments

LOGISTIC ADVANTAGES

  • higher delivery speed
  • wider geography of supplies
  • there are more container marine terminals in the world than ports able to accept liquid tankers
  • container supply by vehicle to the factory
  • multimodal door to door logistics
FLEXITANK INSTALLATION

1. Clean the container floor. Install cardboard sheets on the walls and the floor of a standard 20-foot container.

Make sure there are no nails or other sharp objectsin the container that could damage flexitank.

2.       Install flexitank in a container.

3.       Prepare the hose-pump system.

4.       Connect the accessory hoses to the loading (lower) valve of the flexitank by camlock connection.

5.       Fill the liquid cargo into the flexitank.

6.       After loading of the required volume, close the tap, take off the loading hose and put on the dust cap.

STEAM HEATER PAD

It is used at low temperatures for product unloading,when the transported liquid goods become heavier. It is unfolded on the container floor.Flexitank is installed on the top of it.Then the product is loaded.Heating is carried out by supplying high-pressure steam to the pipes of the heaterpad.

С 30 марта до 3 апреля московский офис работает полностью в удалённом режиме.

 МЫ МЕНЯЕМ НОМЕРА ТЕЛЕФОНОВ НА ЭТОТ ПЕРИОД.

Отдел продаж: +7 (495) 066-90-34

Отдел логистики: +7 (966) 191-49-80

Общие и административные вопросы, связь с руководством: +7 (906) 072-53-30